Description
H00R1x-H is a half-hexagon mounting hole module that supports M2, M2.5, M3 and M4 screw sizes. Use this module to add mounting holes and attachment mechanisms to your Hexabitz arrays! The M2 hole is drilled by default.
Technical Specifications
Supports the following mounting holes with silkscreen markings: M2, M2.5, M3 and M4.
Drilled hole: M2 (2.3 mm).
Four corner pads for power (+3.3V and GND or any other signals connected.) All top pads are connected to each other. Same for bottom pads.
Three edge pads for array ports. Not connected to anything. Used for physical connection.
Physical Properties
Shape: Half hexagon (trapezoid)
Size: 30 mm short diagonal
Area: 3.9 cm^2
Weight: 0.5 g
Soldermask Color: Dark green
Finish: ENIG (gold) or HASL-LF (tin)
H00R1x-H is a half-hexagon mounting hole module that supports M2, M2.5, M3 and M4 screw sizes. Use this module to add mounting holes and attachment mechanisms to your Hexabitz arrays! The M2 hole is drilled by default.
Technical Specifications
Supports the following mounting holes with silkscreen markings: M2, M2.5, M3 and M4.
Drilled hole: M2 (2.3 mm).
Four corner pads for power (+3.3V and GND or any other signals connected.) All top pads are connected to each other. Same for bottom pads.
Three edge pads for array ports. Not connected to anything. Used for physical connection.
Physical Properties
Shape: Half hexagon (trapezoid)
Size: 30 mm short diagonal
Area: 3.9 cm^2
Weight: 0.5 g
Soldermask Color: Dark green
Finish: ENIG (gold) or HASL-LF (tin)
-168x93.jpg){kind=logo}
-168x93.jpg){kind=logo}
