Description
H0FR6x is a compact solid state relay (SSR) module capable of driving AC loads up to 600V and 1.2A. It is based on Panasonic AQH3213A SSR and STM32F0 MCU.
Use as a stand-alone smart AC relay and easily control AC loads (lamps, fans, power outlets, etc.) via a Command Line Interface (CLI).
Firmware has embedded on / off / toggle, timers and PWM functionality.
Program advanced C code with our easy-to-use APIs.
Connect many H0FR6 modules together and combine with H0FR1 to drive DC loads as well.
Send commands to a single relay, a group of relays, or broadcast to all of them.
Connect to external hardware or combine with other Hexabitz modules!
WARNING: Voltages higher than 24V can be dangerous! Make sure you know what you re doing and use protection (circuit breakers, etc.) whenever possible.
Front-End
Panasonic AQH3213A solid-state relay (SSR):
120V or 240V AC rated voltage.
600V AC peak OFF-state voltage.
1.2A ON-state RMS current.
100 sec maximum turn-on time.
Zero-crossing detection.
Yellow indication LED for SSR state.
SSR load connector: TE Connectivity/AMP 2-position 5.08 mm shrouded header.
Back-End
STM32F091CBU6 32-bit ARM Cortex-M0 MCU.
8MHz external oscillator.
Five array ports and six power ports (+3.3V and GND).
Access to 5xUART, 2xI2C, SWD, BOOT0, RESET.
Physical Properties
Shape: Hexagon
Size: 30 mm short diagonal, 17.32 mm side
Area: 7.8 cm^2
Weight: 2 g
Soldermask Color: Dark green
Surface Finish: ENIG (gold) or HASL-LF (tin)
H0FR6x is a compact solid state relay (SSR) module capable of driving AC loads up to 600V and 1.2A. It is based on Panasonic AQH3213A SSR and STM32F0 MCU.
Use as a stand-alone smart AC relay and easily control AC loads (lamps, fans, power outlets, etc.) via a Command Line Interface (CLI).
Firmware has embedded on / off / toggle, timers and PWM functionality.
Program advanced C code with our easy-to-use APIs.
Connect many H0FR6 modules together and combine with H0FR1 to drive DC loads as well.
Send commands to a single relay, a group of relays, or broadcast to all of them.
Connect to external hardware or combine with other Hexabitz modules!
WARNING: Voltages higher than 24V can be dangerous! Make sure you know what you re doing and use protection (circuit breakers, etc.) whenever possible.
Front-End
Panasonic AQH3213A solid-state relay (SSR):
120V or 240V AC rated voltage.
600V AC peak OFF-state voltage.
1.2A ON-state RMS current.
100 sec maximum turn-on time.
Zero-crossing detection.
Yellow indication LED for SSR state.
SSR load connector: TE Connectivity/AMP 2-position 5.08 mm shrouded header.
Back-End
STM32F091CBU6 32-bit ARM Cortex-M0 MCU.
8MHz external oscillator.
Five array ports and six power ports (+3.3V and GND).
Access to 5xUART, 2xI2C, SWD, BOOT0, RESET.
Physical Properties
Shape: Hexagon
Size: 30 mm short diagonal, 17.32 mm side
Area: 7.8 cm^2
Weight: 2 g
Soldermask Color: Dark green
Surface Finish: ENIG (gold) or HASL-LF (tin)
-168x93.jpg){kind=logo}
-168x93.jpg){kind=logo}
