Raspberry Pi Raspberry Pi Camera Webcam original 5MP RPI ordinary camera
Raspberry Pi camera module supports both Model A and Model B2 / B / B + version of Raspberry Pi, the module uses a light-sensitive chip OmniVision s OV5647 1/4 inch chip production, through the flexible cable directly with raspberries send control board. It is equipped with a 5-megapixel image sensor, can record 30 frames per second (no Caton) 1080p Full HD video, or capture 2592x1944 resolution images, and you can also send raspberry installed in your small car, by Wi-Fi wireless monitoring production car. You can also apply image recognition and image tracking
parameter:
Lens: 1/4 5M
Aperture: 2.9
Focal Length: 3.29
FOV: 72.4 degrees
Hardware connection:
1. soft cable, 90-degree vertical connector, HDMI port next to it. When connecting the contact side facing the HDMI interface.
2. Remove the protective film before using the lens
3. bare boards, pay attention to ESD damage, guard against static electricity!
Software:
1. RPi raspi-config and firmware have been updated to the camera, do a apt-get update; apt-get upgrade;
2. raspi-config, select the camera, start RPi firmware camera driver, then reboot
3. Use the command-line program raspivid and raspistill operating camera to capture images or video clips
4. The captured video clips need to play with mplayer
Raspberry Pi camera module supports both Model A and Model B2 / B / B + version of Raspberry Pi, the module uses a light-sensitive chip OmniVision s OV5647 1/4 inch chip production, through the flexible cable directly with raspberries send control board. It is equipped with a 5-megapixel image sensor, can record 30 frames per second (no Caton) 1080p Full HD video, or capture 2592x1944 resolution images, and you can also send raspberry installed in your small car, by Wi-Fi wireless monitoring production car. You can also apply image recognition and image tracking
parameter:
Lens: 1/4 5M
Aperture: 2.9
Focal Length: 3.29
FOV: 72.4 degrees
Hardware connection:
1. soft cable, 90-degree vertical connector, HDMI port next to it. When connecting the contact side facing the HDMI interface.
2. Remove the protective film before using the lens
3. bare boards, pay attention to ESD damage, guard against static electricity!
Software:
1. RPi raspi-config and firmware have been updated to the camera, do a apt-get update; apt-get upgrade;
2. raspi-config, select the camera, start RPi firmware camera driver, then reboot
3. Use the command-line program raspivid and raspistill operating camera to capture images or video clips
4. The captured video clips need to play with mplayer
-168x93.jpg){kind=logo}
-168x93.jpg){kind=logo}
