This DSO138 digital oscilloscope kit adopts ARM Cortex-M3 processor and with 2.4-inch TFT screen. It s easy and reliable for circuit operation. It can display frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.
DSO138 2.4 inch TFT Handheld Digital Pocket Oscilloscope Kit SMD Soldered + Acrylic DIY CASE Cover Shell for DSO138
DSO138 KIT This kit uses an ARM Cortex M3 processor (STM32F103C8) and includes a 2.4 inch colour TFT screen; can be used as an ARM test development board CASE DIY cover for DSO138 oscilloscope. Acrylic material, looks transparent (the film must be torn off). Easy to assemble for electronic enthusiasts.
SOLDERED SMD TFT REGULATOR DETECTION FUNCTION ALLOWS VERSATILE TRANSFORMATION Based on this kit, it can also be used as a voltmeter or data logger to develop secondary
EDGE TRIGGER FOR ASCENT AND RETURN Adjustable vertical displacement with instructions (English language not guaranteed) with automatic, regular and one shot modes make it easy to capture the movement of the waveform.
WAVEFORM PARAMETER DIGITAL DISPLAY Observable previous trigger waveform (negative delay) Can freeze the waveform display at any time (HOLD function) Displays 1Hz/3.3V square waves test signal source frequency, period, pulse width, duty cycle, MAX MIN AVG peak and peak virtual values
WAVEFORM MEMORY FUCTION The waveform is not lost after turning off SHORT CIRCUIT AND IDLE DETECTION Can help the user to find soldering defects
Features:
This kit uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as ARM test development board.
Can be secondary development on the basis of this kit, for example, it can be changed to Millivoltmeter, data loggers.
Adjustable vertical displacement, and with instructions.
With automatic, regular and one-shot modes, easy to capture the moment waveform.
Available rising or falling edge trigger.
Observable previous trigger waveform (negative delay).
Can freeze at any time waveform display (HOLD function).
Comes 1Hz /3.3V square wave test signal source.
With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.
Waveform storage function: will not lose the waveform after power off.
Short-circuit and open-circuit detection: can help the user find out the soldering error.
TFT controller recognition function.
Note:
This DIY kit is soldered yet!
Specifications:
Maximum Real-time Sampling Rate: 1Msps
Accuracy: 12Bit
Sampling Buffer Depth: 1024 bytes
Analog Bandwidth: 0-200KHz
Vertical Sensitivity: 10mV / Div - 5V / Div (1-2-5 progressive manner)
Input Impedance: 1MO
Maximum Input Voltage: 50Vpp (1: 1 probe), 400Vpp (10: 1 probe)
Coupling Modes: DC / AC / GND
The Horizontal Time Base Range: 10µs / Div - 50s / Div (1-2-5 progressive manner)
Supply Voltage: DC 9V
PCB Size: 117 * 76mm / 4.6 * 3in
Screen Size: 52 * 40mm / 2 * 1.57in
Package Size: 18 * 12.5 * 3cm / 7.08 * 4.92 * 1.18in
Package Weight: 119g / 4.21oz
Package List:
1 * DSO138 soldered Oscilloscope
1 * Probe
3 * User Manual(English)
Packaging Include
1 x DIY Digital Oscilloscope Kit
DSO138 2.4 inch TFT Handheld Digital Pocket Oscilloscope Kit SMD Soldered + Acrylic DIY CASE Cover Shell for DSO138
DSO138 KIT This kit uses an ARM Cortex M3 processor (STM32F103C8) and includes a 2.4 inch colour TFT screen; can be used as an ARM test development board CASE DIY cover for DSO138 oscilloscope. Acrylic material, looks transparent (the film must be torn off). Easy to assemble for electronic enthusiasts.
SOLDERED SMD TFT REGULATOR DETECTION FUNCTION ALLOWS VERSATILE TRANSFORMATION Based on this kit, it can also be used as a voltmeter or data logger to develop secondary
EDGE TRIGGER FOR ASCENT AND RETURN Adjustable vertical displacement with instructions (English language not guaranteed) with automatic, regular and one shot modes make it easy to capture the movement of the waveform.
WAVEFORM PARAMETER DIGITAL DISPLAY Observable previous trigger waveform (negative delay) Can freeze the waveform display at any time (HOLD function) Displays 1Hz/3.3V square waves test signal source frequency, period, pulse width, duty cycle, MAX MIN AVG peak and peak virtual values
WAVEFORM MEMORY FUCTION The waveform is not lost after turning off SHORT CIRCUIT AND IDLE DETECTION Can help the user to find soldering defects
Features:
This kit uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as ARM test development board.
Can be secondary development on the basis of this kit, for example, it can be changed to Millivoltmeter, data loggers.
Adjustable vertical displacement, and with instructions.
With automatic, regular and one-shot modes, easy to capture the moment waveform.
Available rising or falling edge trigger.
Observable previous trigger waveform (negative delay).
Can freeze at any time waveform display (HOLD function).
Comes 1Hz /3.3V square wave test signal source.
With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.
Waveform storage function: will not lose the waveform after power off.
Short-circuit and open-circuit detection: can help the user find out the soldering error.
TFT controller recognition function.
Note:
This DIY kit is soldered yet!
Specifications:
Maximum Real-time Sampling Rate: 1Msps
Accuracy: 12Bit
Sampling Buffer Depth: 1024 bytes
Analog Bandwidth: 0-200KHz
Vertical Sensitivity: 10mV / Div - 5V / Div (1-2-5 progressive manner)
Input Impedance: 1MO
Maximum Input Voltage: 50Vpp (1: 1 probe), 400Vpp (10: 1 probe)
Coupling Modes: DC / AC / GND
The Horizontal Time Base Range: 10µs / Div - 50s / Div (1-2-5 progressive manner)
Supply Voltage: DC 9V
PCB Size: 117 * 76mm / 4.6 * 3in
Screen Size: 52 * 40mm / 2 * 1.57in
Package Size: 18 * 12.5 * 3cm / 7.08 * 4.92 * 1.18in
Package Weight: 119g / 4.21oz
Package List:
1 * DSO138 soldered Oscilloscope
1 * Probe
3 * User Manual(English)
Packaging Include
1 x DIY Digital Oscilloscope Kit
-168x93.jpg){kind=logo}
-168x93.jpg){kind=logo}
