Last Update : 15/05/2020

DSO4104C Hantek 100MHZ Oscilloscope 4CHs With 1CH Arbitrary/Function Waveform Generator


Feature:4CH oscilloscope+EXT+AFG+DVM+auto range function100MHz bandwidth,minimum range 500µV /div,1..

  • 950,000.SYP

  • Brand: ATC
  • Product Code:18019043
  • Availability:In Stock

Tags: FEX0101


4CH oscilloscope+EXT+AFG+DVM+auto range function
100MHz bandwidth,minimum range 500µV /div,1GS/s sample rate.
Over 32 types of auto measurement function
Advanced digital trigger system, high trigger sensitivity.
Over 14 types of trigger function: edge, overtime, pulse, pattern, interval, etc.
Serial bus triggering and decode, Bus protocol information can be quickly and intuitively displayed in table form.
Function/arbitrary signal generator25MHz,12BitS resolution, 200MHz DDS, ARB/square wave/sine wave/triangular wave/trapezoidal wave/impulse wave/DC etc.,easy to simulate the sensor.
Integrated USB Host/Device, convenient to communicate with PC. Support U-stick storage/systerm update.
Support a variety of SCPI remote control command
Support optional RS232 port, LAN port. (Optional)
Stable and reliable quality, sturdy and durable.

Sample Rate Range 1GS/s
Waveform Interpolation (sin x)/x
Record Length Maximum 64K samples per single-channel;
Maximum 32K samples per dual-channel (4K, 32K optional)
SEC/DIV Range 2ns/div~100s/div
1, 2, 5 sequence
Sample Rate and

Delay Time Accuracy ±50ppm
Delta Time Measurement Accuracy

(Full Bandwidth)
Single-shot, Normal mode

± (1 sample interval +100ppm × reading + 0.6ns)
>16 averages

± (1 sample interval + 100ppm × reading + 0.4ns)
Sample interval = s/div ÷ 200
AD Converter 8-bit resolution,
each channel sampled simultaneously
VOLTS/DIV Range 500µV/div to 10V/div at input BNC
Position Range 500µV/div~20mV/div, ±400mV
50mV/div~200mV/div, ±2V
500mV/div~2V/div, ±40V
5V/div~10V/div, ±50V
Selectable Analog Bandwidth Limit, typical 20MHz
Low Frequency Response (-3db) =10Hz at BNC

Write a review

Note: HTML is not translated!
    Bad           Good